Safety Joggers
Safety 53
TNA
Mobiak
Context Plus
DPL
Fire Killer
BLS
Sysbel
HoneywellShop
Mains Switching Input/Output unit- LPCB Approved
The Context Plus Intelligent Addressable Mains Switching Input/Output Unit is designed to provide reliable control and monitoring within fire alarm and safety systems. It features a voltage-free single pole change-over relay output capable of switching 250VAC up to 5 Amps, along with a monitored switch input for flexible interfacing. With an improved wiring design, nine pre-configured operating modes, dual input channels, failsafe functionality compliant with BS 7273-4, and earth fault monitoring, the unit ensures safe, efficient, and dependable operation in addressable systems.
TX7210 Addressable Single Input/output Module
The TX7210 Addressable Single Input/Output Module is a highly reliable and intelligent interface device designed for seamless integration within addressable fire alarm systems. Fully compliant with EN54-18:2005 and LPCB approved, this module enables precise monitoring and control of external equipment such as lift returns, door holders, smoke extraction systems, and air handling units. Built with an advanced MCU processor and digital addressing, the TX7210 ensures accurate communication, real-time feedback, and dependable operation in critical fire safety scenarios. Its compact, aesthetically pleasing design and plug-in assembly make installation, commissioning, and maintenance straightforward while maintaining high system integrity.
TX7220 Addressable Dual Input/output Module
The TX7220 Addressable Dual Input/Output Module is a high-performance interface device designed to provide reliable control and monitoring of external equipment within an addressable fire alarm system. Fully compliant with EN54-18 standards, this module supports two independent input or output circuits, making it ideal for complex fire safety applications where multiple devices must be controlled or supervised simultaneously. Powered by an advanced MCU processor with digital addressing, the TX7220 ensures accurate communication, real-time feedback, and continuous line monitoring for enhanced system integrity. Its compact, surface-mounted design with plug-in base allows easy installation while maintaining a clean and professional appearance suitable for modern buildings.
TX7201 Addressable Zone Monitor Module
The TX7201 Addressable Zone Monitor Module is designed to seamlessly integrate conventional fire detection devices into an addressable fire alarm system. It allows multiple conventional detectors or manual call points to be monitored under a single address while maintaining intelligent fault detection and alarm reporting. When any connected device is activated, the module instantly communicates the alarm signal and address to the fire alarm control panel, ensuring fast and accurate identification. Built in compliance with EN54-18 standards, the TX7201 provides reliable monitoring, strong interference resistance, and enhanced diagnostics, making it suitable for modern fire detection installations that require flexibility, safety, and ease of maintenance.
TX7230 Analogue Addressable Isolator Module
The TX7230 Analogue Addressable Isolator Module is a critical safety component designed to maintain the integrity of an addressable fire alarm loop. Its primary role is to automatically isolate short-circuited sections of the loop, ensuring that unaffected devices continue to operate without disruption. Built to EN54-17 standards, the TX7230 enhances system reliability by minimizing downtime and preventing a single fault from disabling the entire loop. With loop-powered operation, automatic reset functionality, and the ability to monitor up to 70 devices, it offers dependable performance and easy installation for indoor fire detection systems.
TX7240 Loop Relay Module
The TX7240 Loop Relay Module is a reliable expansion component designed to enhance the performance and flexibility of addressable fire alarm systems. Installed directly on the bus loop, it extends communication distance and increases branch capacity while maintaining stable and secure signal transmission. With intelligent isolation and correction of bus signals, the module effectively minimizes electromagnetic interference and protects the system against short-circuit faults. Built to EN54-18 standards, the TX7240 ensures consistent operation, rapid fault recovery, and dependable system expansion, making it ideal for complex installations requiring extended loop coverage and enhanced reliability.
NC7004 Network Communication Card
The NC7004 Network Communication Card by TANDA UK Ltd is a versatile communication solution designed for TX7 series control panels. It integrates multiple protocols including USB, Ethernet, CAN Bus, and RS485/RS232, allowing seamless connectivity with third-party systems and devices. The USB interface supports programming the control panel and interfacing with the Graphic Monitor Center (TX7812). The CAN Bus network can monitor and control up to 512 control panels, with full transmission path monitoring to detect faults. The Ethernet port enables IP networking and email notifications, enhancing remote communication capabilities. RS485/RS232 connectivity allows integration with building management systems or other third-party devices. The card is panel-mounted with plug-in terminals for easy installation and requires no specific positioning or addressing. Additionally, the NC7004 is compatible with optional Modbus RTU and TCP/IP networking variants, ensuring flexible deployment in various network configurations. Its robust power and environmental ratings make it suitable for reliable operation in a wide range of conditions.
Electrosoft Class 0-1KV-Electrical Working Glove Honeywell
₨17,400.00The Honeywell Electrosoft Class 0 Electrical Insulating Gloves are precision-engineered for low-voltage electrical applications up to 1,000 volts, offering high dielectric performance, comfort, and durability. Constructed from beige natural latex, these gloves feature a cut-edge design and an ergonomic fit with a lightly powdered interior for effortless wear. At 1 mm thick and 36 cm long, they balance protection and flexibility, and meet the stringent EN 60903:2003 and IEC 903:2002 standards. Rated Category RC, they also provide resistance to acid, ozone, and low temperatures, making them a reliable choice for professionals across industrial and utility sectors.
Electrosoft Class 00-500V-Electrical Working Glove Honeywell
₨14,400.00The Honeywell Electrosoft Class 00 Electrical Insulating Gloves are expertly crafted for low-voltage electrical tasks, offering certified protection up to 500 volts. Made from premium beige natural latex, these gloves are lightweight yet durable, ensuring excellent dexterity, flexibility, and user comfort. With a cut-edge design and 36 cm length, they provide mid-forearm coverage while maintaining ease of movement. Designed under the AZC category, they resist acids, ozone, and cold temperatures, making them ideal for use in a range of indoor and outdoor electrical applications. Fully compliant with EN 60903:2003 and IEC 60903:2002, they are a trusted choice for electricians and utility professionals.
Electrosoft Class 1-7.5KV-Electrical Working Glove Honeywell
₨20,000.00The Honeywell Electrosoft Class 1 Electrical Insulating Gloves are expertly engineered for professionals working with live voltages up to 7,500 volts. Constructed from premium natural beige latex, these gloves combine reliable electrical insulation with ergonomic comfort and durability. Featuring a cut-edge design and extended 41 cm length, they ensure superior forearm protection and flexibility. The RC category rating (resistant to acid, ozone, and cold) and compliance with EN 60903:2003 and IEC 60903:2002 make them a safe choice for medium-voltage applications across power, utility, and renewable energy sectors.
Electrosoft Class 2-17KV-Electrical Working Glove Honeywell
₨28,350.00The Honeywell Electrosoft Class 2 Electrical Working Glove is engineered for high-voltage protection up to 17,000 volts, making it ideal for use in power utilities and electrical maintenance. Made from premium natural beige latex, it offers excellent ergonomic comfort, durability, and flexibility. Its cut-edge design allows use with leather protectors, while the AZC category ensures resistance to acid, ozone, and cold temperatures. A lightly powdered interior enhances comfort and ease of donning, and the glove fully complies with EN 60903:2003 and IEC 60903:2002 safety standards. Suitable for demanding environments, this glove prioritizes safety without compromising usability.
5KV Rubber insulated gloves
₨7,000.00The DPL Natural Latex Glove is crafted from high-quality natural rubber, ensuring comfort, flexibility, and reliable protection during everyday use. Its straight plate design makes it easy to wear on either hand, while a light talcum powder coating prevents sticking and supports longer shelf life. Designed for both comfort and practicality, these gloves are ideal for general-purpose tasks across various environments.
Your Trusted Safety Partner Across Pakistan
Hacsons.com is your reliable e-commerce destination for high-quality safety products, proudly serving customers all over Pakistan. We are dedicated to protecting lives by providing dependable safety solutions for workplaces, industries, and everyday use. Our product range includes carefully selected personal protective equipment and essential safety gear designed to meet practical needs while maintaining comfort and durability.
Quality Safety Products, Delivered Nationwide
At Hacsons, we believe safety should be accessible to everyone, everywhere. That’s why we offer nationwide delivery, competitive pricing, and responsive customer support to ensure a smooth shopping experience. Whether you are purchasing for an individual, a small business, or a large organization, hacsons.com is committed to helping you maintain safe and secure environments with products you can trust.