Blue Eagle

Blue Eagle is a Taiwanese safety brand that started in 1978. The company is headquartered in Taiwan and has been making personal protective equipment for over 45 years. Their products are sold in more than 100 countries and the Blue Eagle brand is registered in over 70. You will find their helmets on construction sites, their respirators in chemical plants and their welding shields in fabrication workshops across Pakistan. Hacsons is an authorized distributor of Blue Eagle in Pakistan. We have been supplying safety equipment to Pakistani industries for over 40 years. Our Blue Eagle range starts at Rs 85 for the EP7 disposable earplugs. The 633P welding faceshield with helmet goes up to Rs 1,750. Helmets, respirators, earmuffs, earplugs, welding shields and safety goggles are all in stock. Every product carries international certifications. We deliver anywhere in Pakistan.

About Blue Eagle: Authorized Distributor in Pakistan

Hacsons is an authorized distributor of Blue Eagle in Pakistan. Every helmet, respirator and welding shield we sell comes through official channels. Nothing grey market. Nothing that has been sitting in a warehouse with hardened rubber seals or brittle plastic.

Blue Eagle is the brand name used by Polison Corporation. The company was founded in 1978 in Taiwan. What makes them different is that almost everything happens in their own factories. Design, development, testing, manufacturing and quality verification all take place in-house. They do not outsource production to third parties. This means they control quality at every stage. From the raw materials to the finished product, everything stays under their roof.

Their product line covers ten categories of protection. Eye protection. Face protection. Head protection. Ear protection. Fall protection. Welding protection. Steel mill protection. Emergency wash protection. Fire escape protection. And respiratory protection. For a safety officer in Karachi or a factory manager in Faisalabad, this means one brand can cover almost every PPE requirement on site. The products are tested to European, American and Canadian standards. CE, ANSI and AS/NZS certifications are standard across the range.

Why Buy Blue Eagle from Hacsons

You buy from an authorized distributor. Genuine product with full manufacturer support. No fake certification labels. No respirators with weak seals that leak. No welding shields with lenses that crack under heat.

We have been in the safety business for over 40 years. We know which Blue Eagle product fits which job. A chemical plant in Karachi needs the NP-306 half face mask with RC-201 organic vapour cartridges for handling solvents. A construction crew in Lahore needs the HC31 hard hat with its pin-lock suspension and rain trough. A textile mill in Faisalabad needs the EM92 earmuffs to bring noise down to safe levels. A welding shop in Rawalpindi needs the 632P welding hand shield with its impact resistant lens. Getting this match right is what we do before we quote.

A paint manufacturing company near Lahore recently ordered Blue Eagle NP-306 half masks with RC-201 cartridges for their mixing area. Their workers were using cheap local masks that leaked around the nose bridge. The workers complained of headaches and nausea after long shifts. The Blue Eagle masks with the twist-lock cartridge system made filter changes quick and the soft seal stopped the leaks. The company now runs fit testing every six months and has had zero complaints since the switch. They have since ordered Blue Eagle welding shields for their maintenance team.

What You Get When You Order from Hacsons

• Genuine Blue Eagle products with manufacturer warranty
• Bulk and corporate pricing for factories, contractors and workshops
• Delivery all over Pakistan including Karachi, Lahore and Islamabad
• Help choosing the right helmet, mask or welding shield for your site
• After sales support and replacement filter guidance

Blue Eagle Range Available at Hacsons

We stock Blue Eagle gear for almost every industry. Construction, manufacturing, chemical plants, textile mills, welding workshops, oil and gas and general industrial work. All in stock, all ready to ship.

The head protection range includes the HC31 Series hard hat. It uses a high impact ABS shell with a pin-lock 6-point suspension. A rain trough directs water away from the face. Universal accessory slots accept ear defenders and visors. It meets ANSI Z89.1 Type I Class E and EN 397 standards. The BP65 bump cap is a lightweight alternative for areas where full helmets are not required but overhead hazards exist. It protects against minor head injuries from racks, beams and suspended structures. The HC31 is priced at Rs 1,450. The BP65 bump cap is also available.

The respiratory range covers half face masks, full face masks and filter cartridges. The NP-305 and NP-306 half face masks are the core models. They use a soft silicone or TPE seal and a dual cartridge design for low breathing resistance. The RC-201 cartridges filter organic vapours, acid gases, fumes and mists. The twist-lock system makes cartridge changes quick without interrupting work. These masks are used in painting, degreasing, solvent handling and confined space work. The NP-102 dust goggles at Rs 350 provide eye protection against fine dust, airborne particles and light impact hazards. The 1.0mm polycarbonate lens resists scratches and the direct ventilation design reduces fogging.

The hearing protection range includes earplugs and earmuffs. The NP35K earplugs meet EN352-2 and ANSI S3.19 standards. They are made from soft foam that moulds to the ear canal. The EM62 earmuffs provide SNR 17 dB protection with a low attenuation design that still allows workers to hear instructions and alarms. The EM66 model offers similar performance with high visibility orange cups. The EM92BK and EM92RD earmuffs offer higher attenuation for medium to high noise environments with NNR ratings of 24 dB. These are used in textile mills, cement plants, steel fabrication shops and generator rooms.

The welding protection range includes the 632P welding hand shield and the 633P flip up lens welding faceshield and helmet. The 632P is a handheld shield with an impact resistant lens. It meets ANSI Z87.1 for eye and face protection. The 633P combines a welding helmet with a flip up lens. It provides front and side impact resistance with excellent electrical insulation. The shell blocks harmful light during welding and no unattenuated light is visible in any position. The lens size is 4¼ x 2 inches. These are used by welders in fabrication shops, shipyards and construction sites across Pakistan.

Need matching protective gear? Look at our head protection and respirator collection ranges.

One thing worth mentioning. Blue Eagle respirator cartridges have a shelf life. Always check the production date before buying. We ship fresh stock with clear manufacturing dates on every box. If you need help matching a cartridge to a specific chemical just ask. We would rather help you pick the right one the first time than have you buy the wrong one twice.