Why Safety Jogger Ceres S3 Safety Shoes Are the Right Fit for Women Who Work Hard
Let’s be honest. Most safety shoes are designed for men. They are wide, heavy and uncomfortable for women who spend long hours on their feet. The Safety Jogger Ceres S3 changes that. It is a low-cut safety shoe built on a women-specific last. That means a better fit, a more comfortable heel cup and less fatigue by the end of your shift. It has a composite toe cap for impact protection and an SJ Flex midsole that stops nails and sharp debris from punching through. The nubuck leather upper is breathable and water-resistant. And because it is completely metal-free, you can pass through metal detectors without setting off any alarms. If you work in light industrial, logistics or facility management in Karachi or Lahore, this shoe is made for you. The rubber outsole is also heat resistant up to 300°C for short periods, which is useful in hot working environments.
Built with Composite Protection and Nubuck Leather for Real Work Conditions
So what is actually inside this shoe? The upper is nubuck action leather. It is soft, durable and resists water penetration. The composite toe cap is metal-free and lightweight, with no thermal or electrical conductivity. The anti-puncture midsole uses SJ Flex, which is a textile material that covers 100% of the sole surface and is lighter and more flexible than steel. The rubber (NBR) outsole is slip-resistant with an SRC rating, meaning it passes both SRA and SRB tests on steel and ceramic surfaces. It is also resistant to oil and fuel. The shoe meets EN ISO 20345:2011 and ASTM F2413:2018 standards with an S3 SRC HRO rating. The HRO rating means the outsole can withstand contact with surfaces up to 300°C for short periods. The 3D-Mesh lining breathes, and the SJ recycled foam footbed is removable for custom orthopaedic insoles (Neskrid compatible). The 3-Fit system lets you adjust the width for a custom fit.
Comfort and Convenience That Keep You Moving All Shift
In practice, a safety shoe is only as good as its comfort. The Ceres S3 weighs 0.470 kg. That is one of the lightest safety shoes in its class. The women-specific last provides a better fit for narrower feet and a more comfortable heel cup. The heel energy absorption feature reduces fatigue. The water-resistant leather means you can work in wet conditions without your feet getting soaked. The metal-free construction means no thermal or electrical conductivity, so your feet stay comfortable in extreme temperatures. Hacsons delivers these shoes directly to Karachi, Lahore and Gujranwala. We also ship to Islamabad, Rawalpindi, Sialkot, Hyderabad, Multan, Faisalabad, Peshawar, Quetta and every other city in Pakistan. Need bulk for your company? We handle that with competitive pricing and dedicated support. The Ceres S3 comes in EU sizes 36 to 42. If you need a women safety shoe that protects against punctures, slips and heat while fitting like it was made for you, this is the one.
CE
Safety toecap
Puncture resistant
Slip resistant outsole
Heel energy absorption
Oil and fuel resistant outsole
Antistatic shoe
Water penetration and absorption
| Model | CERES S3 SRC HRO |
|---|---|
| Reference | 820500 |
| Product Type | Women’s Low-Cut Safety Shoes |
| Color | Black, Academy |
| Upper | Nubuck Action Leather |
| Toecap | Composite, Metal-Free |
| Midsole | Anti-Puncture Textile (SJ Flex), Metal-Free |
| Outsole | Rubber (NBR), Slip Resistant (SRC), Oil and Fuel Resistant, Heat Resistant (HRO) |
| Lining | 3D-Mesh |
| Footbed | SJ Recycled Foam Footbed (96% Recycled), Removable |
| Safety Features | Composite Toe Protection, Puncture Resistance, Slip Resistance (SRC), Antistatic Protection, Heel Energy Absorption, Heat Resistant Outsole (HRO), Scuff Cap |
| Heat Resistance | HRO Rated, Outsole Resistant to Contact with Surfaces up to 300°C for Short Periods |
| Water Resistance | Resistant to Water Penetration and Absorption |
| Fit System | 3-Fit System with Orthopedic Solution (Neskrid) Compatibility |
| Safety Standard | S3 SRC HRO |
| Certification Standard | EN ISO 20345:2011 / ASTM F2413:2018 |
| Certification | CE |
| Sample Weight | 0.470 kg (Size 42) |
| Size Range | EU 36-42, UK 3.5-8.0, US 6.0-10.5, JPN 22.5-26.5, KOR 235-270 |
| Application / Work Environment | Suitable | Reason |
|---|---|---|
| Light Industrial Work | ✓ | Composite toe cap and SJ Flex midsole protect against common industrial hazards. Women-specific fit for comfortable long shifts. |
| Warehouses and Logistics | ✓ | Lightweight design and SRC slip resistance during material handling, loading and warehouse operations. |
| Facilities Management | ✓ | Comfortable fit, slip resistance and general industrial protection support daily maintenance and facility operations. |
| Hot Working Environments | ✓ | HRO (Heat Resistant Outsole) rating means the outsole can withstand contact with surfaces up to 300°C for short periods. |
| Automotive Workshops | ✓ | Oil and fuel resistant outsole, composite toe protection and metal-free design for hybrid and electric vehicle work. |
| Food Processing (Dry Areas) | ✓ | Antistatic and slip-resistant properties make it suitable for dry food handling areas. Check specific hygiene requirements. |
| Electrical Work Requiring Insulating Footwear | ✕ | Antistatic footwear is not the same as electrically insulating footwear. It should not be used where electrical insulation is specifically required. |
| Heavy Construction Sites | ✕ | This is a lightweight S3 shoe. For heavy construction with high impact and puncture risks an S3 rated shoe with a higher protection level is recommended. |
| Firefighting and Emergency Fire Response | ✕ | These are industrial safety shoes and are not designed as specialized firefighting footwear for extreme heat and fire exposure. |
| High-Temperature / Molten Metal Areas | ✕ | The provided specifications do not indicate protection against extreme heat molten metal or specialized thermal hazards. |
FAQ's
S3 is a high safety rating under EN ISO 20345. It means the shoe has toe protection, puncture resistance, antistatic properties, energy absorption at the heel and water resistance. The Ceres S3 also carries the SRC rating for slip resistance and the HRO rating for heat resistance.
Yes. It uses a composite toe cap and an SJ Flex anti-puncture textile midsole. There are no metal components, so it will not trigger metal detectors and will not conduct heat or electricity. This makes it ideal for women who work in security-sensitive environments.
HRO stands for Heat Resistant Outsole. It means the rubber outsole can withstand contact with surfaces up to 300°C for short periods. This makes the Ceres S3 suitable for hot working environments where you might step on hot surfaces.
Yes. The Ceres S3 is built on a women-specific last for better fit and comfort in smaller sizes. It provides a more comfortable heel cup and less fatigue during long shifts compared to unisex safety shoes.
EU sizes 36 to 42. Hacsons delivers to Karachi, Lahore and Gujranwala. We also ship to Islamabad, Rawalpindi, Sialkot, Hyderabad, Multan, Faisalabad, Peshawar, Quetta and all other cities across Pakistan. Bulk orders welcome.
Payment Terms
- Cash on Delivery (COD): A 4% additional tax will be added to the total order amount for orders placed through Cash on Delivery.
- Advance Payment for Heavy or Voluminous Products: For products that are heavy, oversized, or large in volume, advance payment may be required. Such orders may be dispatched through a Bilty/Cargo Service, depending on the product and delivery requirements.
- Standard Delivery: Standard courier delivery may be fulfilled through M&P or Trax.
- Fast Delivery: Faster delivery options may be fulfilled through TCS or Leopards Courier.
- Additional Charges: Any applicable delivery charges, taxes, cargo charges, or other additional costs will be communicated during checkout or order confirmation.
- Order Processing: Orders will be processed once the required payment, order confirmation, and applicable delivery arrangements have been completed.
Return Policy
- 7-Day Return Period: Products may be returned within 7 days of receiving the order.
- Original Condition: The product must be unused, undamaged, and in its original condition.
- Original Packaging: Products must be returned with their original packaging intact.
- Unused Products Only: Returns will not be accepted for products that have been used, modified, or improperly handled.
- Verification & Approval: All returned products are subject to inspection and approval by HAC & SONS before a replacement or other appropriate resolution is provided.
Reviews
Clear filtersThere are no reviews yet.